SlackBuilds Repository

14.0 > System > apcupsd (3.14.10)

APCUPSD can be used for power management and controlling most of APC's UPS
models on Unix and Windows machines. Apcupsd works with most of APC's
Smart-UPS models as well as most simple signalling models such as Back-UPS
and BackUPS-Office.

This buildscript veers from the "accepted" installation of apcupsd, but for
what I believe you'll see are justifiable reasons. The stock install of
apcupsd detects its presence on Slackware and attempts to patch the system's
/etc/rc.d/rc.6 script and places the rc.apcupsd script inside /etc/rc.d
(instead of DESTDIR/etc/rc.d - in essence, it touches files outside DESTDIR).
I don't view this as even remotely acceptable, so the build script disables
the distribution-specific installation to prevent messing with files outside
DESTDIR; however, this does make it require some manual configuration after
installation.

After installing, see /usr/doc/apcupsd-3.14.10/README.SLACKWARE for more
information on how to modify rc.6 and how to start the apcupsd daemon
automatically at boot.

Maintained by: Robby Workman
Keywords: backup,battery,ups,apc,power,nut

Homepage:
http://www.apcupsd.org

Source Downloads:
apcupsd-3.14.10.tar.gz (5928822d855c5cf7ac29655e3e0b8c23)

Download SlackBuild:
apcupsd.tar.gz
apcupsd.tar.gz.asc (FAQ)

(the SlackBuild does not include the source)

See our HOWTO for instructions on how to use the contents of this repository.

Access to the repository is available via:
ftp git cgit http rsync

[  Exec: 0.0333 sec  |  Load: 0.11 0.16 0.17  ]

© 2006-2014 SlackBuilds.org Project. All rights reserved.
Slackware® is a registered trademark of Patrick Volkerding
Linux® is a registered trademark of Linus Torvalds
Web Design by WebSight Designs |  Managed Hosting by OnyxLight Communications