SlackBuilds Repository

14.0 > Development > teensy_loader_cli (2.0)

The Teensy is a complete USB-based microcontoller development
system, in a very small footprint, capable of implementing many
types of projects. All programming is done via the USB port. No
special programmer is needed, only a standard "Mini-B" USB cable.

The Teensy Loader program communicates with your Teensy board
when the HalfKay bootloader is running, so you can download new
programs and run them.

The Teensy Loader is available in a command line version to
automate programming, typically using a Makefile.

This contains only the cli version of the Teensy Loader. To run
it type: teensy_loader_cli.

Maintained by: Felix Pfeifer
Keywords: mcu,atmel,avr,programmer

Homepage:
http://www.pjrc.com/teensy/loader_cli.html

Source Downloads:
teensy_loader_cli.2.0.tar.gz (29376dce1b37826c91839a53cff75dc0)
49-teensy.rules (9f0593b4f3dab6d9a32ebc993d6aedc3)

Download SlackBuild:
teensy_loader_cli.tar.gz
teensy_loader_cli.tar.gz.asc (FAQ)

(the SlackBuild does not include the source)

See our HOWTO for instructions on how to use the contents of this repository.

Access to the repository is available via:
ftp git cgit http rsync

[  Exec: 0.0482 sec  |  Load: 0.05 0.09 0.06  ]

© 2006-2014 SlackBuilds.org Project. All rights reserved.
Slackware® is a registered trademark of Patrick Volkerding
Linux® is a registered trademark of Linus Torvalds
Web Design by WebSight Designs |  Managed Hosting by OnyxLight Communications